SW Series Water Cooled Stationary Screw Air Compressor

  • water cooled
  • High quality screw
  • High precision filtration separation system
  • High efficiency motor
  • High safety control valve system
  • Personalized intelligent control system

Description

High quality screw

Air end is designed with large rotor and low speed.

High machining accuracy, low vibration, low noise, high reliability.

SKF efficient bearing, lifetime more than 100,000 hours.

High precision filtration separation system

1μm precision air filter, 10 μm precision oil filter,

large capacity design standard to ensure the compressor Long-term efficient and safe operation.

oil content≤3ppm,which provides you with a cleaner air source.

High efficiency motor

high efficiency, strong and durable

Suitable for the bad operating condition

long service life, effectively reduce running power consumption

F class insulation, IP54 protection level

SKF bearing, low noise, long lifetime

The external filling nozzle, reliable operation and easy maintenance

High safety control valve system

high quality inlet control valve, Large caliber, small resistance, precision casting

Reliable check valve, low fluid resistance, good sealing, quick closure

High quality minimum pressure valve, low pressure loss, open and close safety and reliability

temperature control valve prompt response, to avoid the condensed water

The fluoro rubber with O ring , the invisible place gives you the visible safety

Personalized intelligent control system

Intelligent control system, full automatic operation, Chinese and English interface, easy operation, clear operation status.

Continuously monitor the important operation parameters,when deviating from the preset value,

automatically send the alarm or stop, and show the cause of the failure, automatically write to the history failure.

The cooling system

Water cooling design, remarkable cooling , even in the high temperature, dust environment can make the lubricating oil temperature in the normal range, ensure the air compressor normal running .

Specifications

Specification
Type Power (KW/HP) Discharge pressure (Mpa) Free air delivery (m3/min) Weight (kg) Noise (dB(A)±3) Dimension (L×W×H mm) External inverter weight kg) External inverter dimension (L×W×H mm) Cooling water outlet and inlet (Inch) Air supply (Inch)
SWG37(-T)/7 37/50 0.7 3.35~6.7 1020 72 1760×910×1680 1″ 1-1/2″
SWG37(-T)/10 1 2.85~5.7
SWG37(-T)/13 1.3 2.4~4.8
SWG37(-T)/8 0.8 3.1~6.2
SWA45(-T)/7 45/60 0.7 3.9~7.8 1050 73 1760×910×1680 1″ 1-1/2″
SWA45(-T)/10 1 3.4~6.8
SWA45(-T)/13 1.3 2.7~5.4
SWA45(-T)/8 0.8 3.75~7.5
SWC55(-T)/7 55/75 0.7 5.25~10.5 1990 74 2000×1200×1798 100 800×600×1923 1″ 2″
SWC55(-T)/10 1 4.25~8.5
SWC55(-T)/13 1.3 3.8~7.6
SWC55(-T)/8 0.8 5~10
SWC75(-T)/7 75/100 0.7 6.75~13.5 2100 75 2000×1200×1798 100 800×600×1923 1″ 2″
SWC75(-T)/10 1 5.75~11.5
SWC75(-T)/13 1.3 4.75~9.5
SWC75(-T)/8 0.8 6.4~12.8
SWA90(-T)/7 90/125 0.7 8.4~16.8 2200 76 2400×1400×2000 150 800×600×2133 1-1/2″ 2-1/2″
SWA90(-T)/10 1 7.05~14.1
SWA90(-T)/13 1.3 6.1~12.2
SWA90(-T)/8 0.8 8.1~16.2
SWA110(-T)/7 110/150 0.7 10.5~21 2500 77 2400×1400×2000 150 800×600×2133 1-1/2″ 2-1/2″
SWA110(-T)/10 1 8.75~17.5
SWA110(-T)/13 1.3 7.25~14.5
SWA110(-T)/8 0.8 10~20
SWA132(-T)/7 132/180 0.7 12~24 2600 78 2400×1400×2000 150 800×600×2133 1-1/2″ 2-1/2″
SWA132(-T)/10 1 10.25~20.5
SWA132(-T)/13 1.3 8.3~16.6
SWA132(-T)/8 0.8 11.25~22.5
SW160(-T)/7 160/215 0.7 14.25~28.5 3500 80 2400×1400×2000 250 900×600×2133 1-1/2″ 2-1/2″
SW160(-T)/10 1 12.25~24.5
SW160(-T)/13 1.3 10.1~20.2
SW160(-T)/8 0.8 13.5~27
SW185(-T)/7 185/250 0.7 16.9~33.8 4000 82 3200×1800×2122 250 900×600×2133 2-1/2″ 4″
SW185(-T)/10 1 13.75~27.5
SW185(-T)/13 1.3 11.25~22.5
SW185(-T)/8 0.8 16.85~33.7
SWA200(-T)/7 200/270 0.7 18.2~36.4 4200 82 3200×1800×2122 250 900×600×2133 2-1/2″ 4″
SWA200(-T)/10 1 15.6~31.2
SWA200(-T)/13 1.3 13.25~26.5
SWA200(-T)/8 0.8 18.3~36.3
SWA220(-T)/7 220/300 0.7 19.65~39.3 4500 82 3200×1800×2122 250 900×900×2413 2-1/2″ 4″
SWA220(-T)/10 1 16.8~33.6
SWA220(-T)/13 1.3 14.3~28.6
SWA220(-T)/8 0.8 19.6~39.2
SWA250(-T)/7 250/335 0.7 21.6~43.2 5800 83 3200×1800×2122 250 900×900×2413 2-1/2″ 4″
SWA250(-T)/10 1 20.75~41.5
SWA250(-T)/13 1.3 18.1~36.2
SWA250(-T)/8 0.8 21.6~43.2
SW280(-T)/7 280/378 0.7 26.2~52.4 4500 83 3200×1800×2122 250 900×900×2413 2-1/2″ 4″
SW280(-T)/10 1 21.6~43.2
SW280(-T)/13 1.3 18.85~37.7
SW280(-T)/8 0.8 24.3~48.6

Reviews

There are no reviews yet.

Be the first to review “SW Series Water Cooled Stationary Screw Air Compressor”

Your email address will not be published. Required fields are marked *